Concrete Calculator
Estimate the concrete for a slab, patio, pad or walkway, including a waste allowance and premixed bag counts.
How to use it
- Measure the length and width of the area in feet.
- Enter the thickness in inches. Patios and walkways are often about 4 inches; check local guidance for driveways and structural work.
- Keep a waste allowance of 5 to 10% for uneven ground, spills and forms that bow.
- Order ready-mix by the cubic yard or metre, or use the bag counts for small jobs.
The formula
Cubic yards = length (ft) × width (ft) × thickness (in) ÷ 12 ÷ 27
Dividing the thickness by 12 converts inches to feet, and dividing cubic feet by 27 converts to cubic yards, since a cubic yard is 3 × 3 × 3 feet.
Worked example
A 10 × 10 ft patio, 4 inches thick: 10 × 10 × 4 ÷ 12 = 33.3 cubic feet, or 1.23 cubic yards. With 5% extra, order about 1.3 cubic yards, or 59 bags of 80 lb premix.
Bag yields
Bag counts use typical yields of about 0.60 cubic feet for an 80 lb bag, 0.45 for 60 lb and 0.30 for 40 lb. Yields vary by product, so check the bag label. For more than about one cubic yard, ready-mix delivery is usually easier than mixing bags.
Frequently asked questions
How do I handle a circular pad?
Find the area with the square footage calculator, then multiply the square feet by the thickness in inches and divide by 12 for cubic feet.
Is this a structural calculation?
No. It estimates volume only. Footings, driveways and anything load-bearing should follow local building codes and professional advice.
Reviewed October 2026 · How we build our calculators · Report an issue